Fusor® 123 Non-Sag Seam Sealer (Fast) 210ML

$74.01 $59.21
Availability: In Stock Pre order Out of stock

Fusor® 123/126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

Fusor 123/126 sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time. Sealer can be applied directly to bare metal or primed surfaces.

Fusor 123 = 10.1 oz (300 mL)
Fusor 126 = 1.7 oz (50 mL)

Shelf Life
Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container.

Apply over 2K primers; urethane 2K chemistry

OEM Approvals
Honda, Acura

Features and Benefits
High Performance – provides excellent adhesion to bare or primed surfaces.

Versatile – bonds bare metal, epoxy or urethane two-component primed surfaces; weld through with minimal burn back.

Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging.

Environmentally Resistant – provides excellent corrosion protection.

Easy to Finish – can be tooled, wiped clean, sanded and/or painted immediately.

Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired

Typical Properties*
Appearance White Paste
Base Chemistry Urethane
Work Time 3 minutes @ 70°F (21°C)
Paint Time** 10 minutes @ 70°F (21°C)
Full Cure 24 hours @ 70°F (21°C)