Auveco

Sort by:
Au-ve-co® 17597 Miniature Bulb, Natural Amber Light

Au-ve-co® 17597 Miniature Bulb, Natural Amber Light

$33.09$24.15
Au-ve-co® Miniature Bulb, Type 3 Light, Natural Amber Light, Wagner® Make/Model/Year Compatible
Au-ve-co® Norma Torro® 16873 Hose Clamp, 5/8 in Minimum Clamp Diameter, 1 in Maximum Clamp Diameter

Au-ve-co® Norma Torro® 16873 Hose Clamp, 5/8 in Minimum Clamp Diameter, 1 in Maximum Clamp Diameter

$33.09$24.15
Unique off-set non-welded design of the housing provides resistance to over tightening damage to the hose. The short housing saddle gives a smooth underside ensuring high sealing efficiency. These clamps...
Au-ve-co® 14489 Flange Bolt, 1/2-20 Thread, Fine Thread, 1-1/2 in OAL, Hex Head, Oil/Phosphate-Coated

Au-ve-co® 14489 Flange Bolt, 1/2-20 Thread, Fine Thread, 1-1/2 in OAL, Hex Head, Oil/Phosphate-Coated

$33.09$24.15
Au-ve-co® flange bolts and locknuts form a strong and dependable fastening system that substantially cuts truck assembly, maintenance and repair costs. The flange bolts are made to IFI 111 industry...
Au-ve-co® 15164 Non-Insulated Ring Terminal, 6 AWG Wire

Au-ve-co® 15164 Non-Insulated Ring Terminal, 6 AWG Wire

$32.98$24.08
Au-ve-co® Non-Insulated Ring Terminal, 6 AWG Wire, Ring Tongue, Stud Mounting, Pack Package, 3/8 in Stud Additional Information
Au-ve-co® 13572 All-Purpose Awl, 4-1/2 in L Shank, 8-1/2 in OAL

Au-ve-co® 13572 All-Purpose Awl, 4-1/2 in L Shank, 8-1/2 in OAL

$32.89$24.01
All-purpose awl used in the installation of roof windows, wind shield rubber and back glass. it is used to remove body clips, moldings and for spring pulling and cotter pin...
Au-ve-co® 11057 Insert Lock Nut, M10x1.5 Thread, Heat Treated Alloy Steel, Zinc-Plated

Au-ve-co® 11057 Insert Lock Nut, M10x1.5 Thread, Heat Treated Alloy Steel, Zinc-Plated

$32.89$24.01
Au-ve-co® Insert Lock Nut, M10x1.5 Thread, Heat Treated Alloy Steel, Zinc-Plated
Au-ve-co® 11507 External Retaining Ring, 35 mm Dia Shaft, 33 mm Dia Groove, Oil/Phosphate-Coated

Au-ve-co® 11507 External Retaining Ring, 35 mm Dia Shaft, 33 mm Dia Groove, Oil/Phosphate-Coated

$32.89$24.01
Au-ve-co® External Retaining Ring, 35 mm Shaft Diameter, 33 mm Groove Diameter, 1.6 mm Groove Width, Oil/Phosphate-Coated
Au-ve-co® 19112 Single Head Hood Insulation Retainer, System of Measurement: Metric, Nylon

Au-ve-co® 19112 Single Head Hood Insulation Retainer, System of Measurement: Metric, Nylon

$32.79$23.94
Au-ve-co® Single Head Hood Insulation Retainer, System of Measurement: Metric, Bottom Head Diameter: 30 mm, 8 mm Stem Diameter, 16 mm Stem Length, Nylon, Black, Make/Model/Year Compatible: Toyota
Au-ve-co® 13046 Drill Bit, 13/64 in Drill Fraction, 2-7/16 in L Flute, 3-5/8 in OAL, 135 deg Point, Black

Au-ve-co® 13046 Drill Bit, 13/64 in Drill Fraction, 2-7/16 in L Flute, 3-5/8 in OAL, 135 deg Point, Black

$32.70$23.87
Au-ve-co® Drill Bit, Drill Size - Fraction: 13/64 in, Drill Size - Decimal Inch: 0.2031 in, 3-5/8 in Overall Length, Straight Shank, 2-7/16 in Flute, Split Point, 135 deg Point...
Au-ve-co® 12293 Male Rod End With Stud Ball Joint, 1.937 in OAL, Low Carbon Steel, Dichromate

Au-ve-co® 12293 Male Rod End With Stud Ball Joint, 1.937 in OAL, Low Carbon Steel, Dichromate

$32.70$23.87
Au-ve-co® Male Rod End, 0.516 in Ball Diameter, 1.937 in Overall Length, Low Carbon Steel, Dichromate, Additional Information: 1/4-28 LH Thread Size-External, 1 in Thread Length-External, 1.562 in Ball Center...
Au-ve-co® 15706 Wing Wire Nut Connector, 20 to 8 AWG Wire

Au-ve-co® 15706 Wing Wire Nut Connector, 20 to 8 AWG Wire

$32.70$23.87
Au-ve-co® Wing Wire Nut Connector, 20 to 8 AWG Wire, Red
Au-ve-co® 158 90 deg Elbow, 1/8 in Compression Tube x 1/8 in MNPT, Brass

Au-ve-co® 158 90 deg Elbow, 1/8 in Compression Tube x 1/8 in MNPT, Brass

$32.59$23.79
Au-ve-co® 90 deg Elbow, Elbow Fitting, 1/8 in Connection Size 1, Compression Tube Connection Type 1, 1/8 in Connection Size 2, MNPT Connection Type 2, Compression|MNPT Connection, Brass, Brass Material...