Sort by:
Auveco 20651 Cage Nut, M6x1 Thread, Zinc
The Auveco 20651 is a metric cage nut with an M6x1 thread and a zinc finish. It gives a threaded attachment point in sheet-metal panels and is listed as compatible...
Auveco Norma Torro® 16869 Hose Clamp, 3/8 in Minimum Clamp Diameter, 5/8 in Maximum Clamp Diameter
Unique off-set non-welded design of the housing provides resistance to over tightening damage to the hose. The short housing saddle gives a smooth underside ensuring high sealing efficiency. These clamps...
Auveco 15163 Non-Insulated Ring Terminal, 6 AWG Wire
Auveco Non-Insulated Ring Terminal, 6 AWG Wire, Ring Tongue, Stud Mounting, Pack Package, 5/16 in Stud Additional Information
Auveco 6705EPA Push-Type Retainer Assortment, 360 -Piece
Auveco Push-Type Retainer Assortment, Nylon, Black, 360 Piece
Auveco 9416 Trim Clip, Metal
Auveco Trim Clip, Metal, Additional Information: 0.06 to 0.09 in Panel Range
Auveco 12044 Quick Disconnect Ball Joint Assembly, 1-1/4 in OAL, Low Carbon Steel, Yellow Dichromate
Auveco Quick Disconnect Ball Joint Assembly, 0.347 in Ball Diameter, 1-1/4 in Overall Length, Low Carbon Steel, Yellow Dichromate, Additional Information: 1/4-28 Screw Size, 17/32 in Length Internal Thread, 9/16...
Auveco 6712EPA J and U-Nut Assortment, 440 -Piece
Auveco J and U-Nut Assortment, 440 Piece
Auveco 16941 Wire Loom Routing Clip, 1 x 1-9/32 in Conduit/Cable, Nylon, Black
Auveco Wire Loom Routing Clip, 1 x 1-9/32 in Conduit/Cable, Nylon, Black
Auveco 14101 Universal Spring, 5-5/8 in OAL, 23/32 in OD, 2-Hooks End, Galvanized
The Auveco 14101 is a galvanized universal extension spring with hooks on both ends, measuring 5-5/8 in overall. It's a handy replacement spring for shops and restorers who need a...
Auveco 8776 Solderless Terminal, Brass Terminal
Auveco Solderless Terminal, 16 to 14 ga Gauge, Brass Terminal, Compatible With: 8774 and 8775 Terminals, Additional Information: Tin-Plated Finish
Auveco 14253 Wheel Nut, M12x1.25 Thread, 21 mm Width Across Flat, 16 mm H
Auveco Wheel Nut, Type 1 Nut, System of Measurement: Metric, M12x1.25 Thread, 21 mm Width Across Flat, 16 mm Height, Datsun, Nissan Make/Model/Year Compatible